ACCURACY AND FLEXIBILITY
The Case IH 810 Flex-Air™ applicator delivers accurate application of dry fertilizer and granular herbicides. It’s designed to co-apply rather than blend for unmatched accuracy, and it meters near the distribution point so you can change rates instantly. Put one, two or three bins on your Titan™ Series floater. Then choose a 500-gal. (1890-L) liquid system, mounted externally to maximize bin capacity.
810 Flex-Air Applicator Main Bin Cu. Ft. (Cu M) 287 (8.1) Length (boom folded) Ft (M) 14.3 (4.4) Weight, Lbs (KG) 6,560 (2976)
810 FLEX-AIR BOX
The Case IH 810 Flex-Air™ has a large, 287 cu. ft. (8.1 cu. m) capacity bin. Because the 810 Flex-Air main bin is split, it can carry one or two different blends, allowing you to address a variety of field needs. That flexibility is what puts the “flex” in the 810 Flex-Air – the only system in the industry to offer this configuration in a single bin option.
810
Flex-Air Box
The 810 Flex-Air offers even more options for total
application flexibility. That’s because Case IH offers double
and triple bin options. They’re available to increase total
product capacities up to 346 cu. ft. (9.8 cu. m) when equipped
with:
- 50 cu. ft. (1.4 cu. m) co-ap bins
- Supplemental augers
CO-AP BINS
Case IH 810 Flex-Air™ applicator co-ap bins are available in 37- or 50-cu. ft. (1.0- or 1.4-cu. m) capacities. The bins are mounted externally of the main bin – that means main box capacity is not compromised and you get additional application flexibility. Both sizes are easy to access and easy to service. And the bins tip out for easy, hassle-free cleaning.
810 Flex-Air Co-Ap Bins
Co-ap bins for the Case IH 810 Flex-Air applicator are designed with accuracy
and productivity in mind, with field-friendly features like
extra large doors that open to the center for simple loading,
and the wind cover latches to make access a breeze. Plus:
- Grease banks are centralized for easy maintenance
- Internal illumination for both co-ap bins and the metering housing for easy monitoring in low light conditions
- Three metering wheel sizes available to cover all your application needs
MID-MOUNTED BOOMS
Case IH 810 Flex-Air™ mid-mounted booms are located over the chassis’ center of gravity, forming a very stable spreading platform with reduced boom hop.
A parallel linkage suspension system supports the booms, absorbs shock loads and maintains a level boom through compression springs and centering shocks.
810 Flex-Air Mid-Mounted Booms
The stable mid-mounted booms fold forward into the spreading
position and fold rearward for transport, allowing for excellent
visibility while traveling from field to
field. They are available in two widths:
- 60 ft. (18.3 m) with 2.5- or 3-in. (63.5- or 76-mm) diameter tubes
- 70 ft. (21.3 m) with 2.5-in. (63.5-mm) diameter tubes
The four rear tubes on all boom widths are 3-in. (76-mm) diameter tubes.
PRODUCT DELIVERY SYSTEM
Product is transferred from the main bin to the product delivery hopper via an 8-in. (20.3-cm) auger and flows freely to a dual conveyor belt system located directly below the product delivery hopper. The dual conveyor belt system dedicates one conveyor to each boom allowing for instantaneous on/off and true left/right shutoff capability.
810 Flex-Air Product Delivery System
Each conveyor has its own metering gate system with
three gate height adjustments. Vertical
product dividers evenly split product flow before it drops off the conveyors
into dedicated venturi tubes where it is carried out each boom
tube on a bed of accelerated air for even dispersal on the
ground.
The 810 Flex-Air gives you the choice of two controller options:
- The Case IH SCS 5000, for single product fixed or variable-rate application and data logging
- The Case IH Viper Pro, for single or multiple product applications at fixed or variable rates
- The Viper will perform data logging and a variety of field mapping functions via the full color, touch-screen display
