LIQUID APPLICATORS
Pull-Type
Available Models
6600
Tri-fold toolbar up to 62' wide
- High production demands powerful performance. The 6600 is the ultimate upgrade for high efficiency placement and maximum productivity
- Heavy duty 7” x 7” x ½” wall thickness double toolbar center section
- Covers up to (24) 30” rows
- Comes with either hydraulic pump system with an automatic rate controller or manual set ground drive pump
6500 Series
Double bar front-mounted toolbar with hydraulic parallel lift
- Extra heavy-duty caddie
- Designed for liquid strip till or hi-pressure 28%
6400 Series
Optimized productivity with superior visibility and control.
- Enhanced nutrient application with controlled precision placement that is proven reliable for today’s tough applicating environments.
- Single bar heavy duty front-mounted toolbar
- Great row visibility
- Accurate applicator control
6300 Series
Rugged manufacturing and quality performance.
- Durable construction combined with advanced toolbar designs to deliver effective and efficient application across a wide range of field conditions.
- Heavy duty front-mounted toolbar
- Great row visibility
- Accurate applicator control
Pull-Type Specifications
Download Specs Sheet6600
6500
6400
6300
6200
Toolbar
Heavy-duty 7"x 7" x 1/2" wall thickness double toolbar section & primary wings, secondary & outer wings are single bar.
Double bar of 4” x 6” x ½” heavy wall tubing, center section – wings 3/8” wall
7” x 7”, ½” Wall Single bar center section, 3/8” wall wings
7” x 7”, ½” wall single bar center section, 3/8” wall wings
Double bar center section of 4" x 6" heavy wall tubing
Available Toolbar Widths
Toolbar Lengths up to 62’
Toolbar lengths up to 42'
27.5’, 32.5’, 37.5’ and 42.5’
27.5’, 32.5’, 37.5’ and 42.5'
Available in 26', 30', 35' lengths
Center Section
14’ 5” center section
All hydraulic fold toolbar
All hydraulic fold toolbar
13’ 6” Center section with toolbar lengths up to 42’
13’6” Center section with toolbar lengths up to 42.5'
12" x 6" wide center section
11' center section with toolbar lengths up to 35'
Hydraulic folding wings and hydraulic lift
Hydraulic folding wings and hydraulic lift
Tank
1,700 Gallon Elliptical Tank
1,300 Gallon Elliptical Tank
1,400 or 1,700 gallon elliptical tanks available
1,000 gallon cone tank with 30 degree slope
715 or 1,000 gallon fully drainable leg tank
Length
17’–2”
Overall length is 15’ 3”
Hitch to rear plumbing –19’3” with plumbing
Hitch to rear plumbing –19’3” with plumbing
20' 6" length with plumbing
Travel Width
18'
18' 8"
17’8” with coulters on 30”rows
17’8” with coulters on 30”rows
15' 6" with coulters on 30" rows
Height
13' 4"
12' 6"
12’ 7”
12' 7"
13' - 7"
Ground Clearance of Frame
34 1/2"
34 1/2"
34"
34"
32 1/2"
Adjustable Wheel Track
120” to 144”, Optional 144” to 160”
120” to 144”
120” to 144”
120” to 144”
74" to 120"
Tires/Rims
46 X W12-10 bolt rims” to “46 x 12, 10 bolt rims
46 X W12-10 bolt rims” to “46 x 12, 10 bolt rims
46 X W12-10 bolt rims” to “46 x 12, 10 bolt rims
38 x w10-bolt rims” to 38 x 10, 10 bolt rims
16.5 x 16.1 implement tires or 385/65RR-22.5 tires (required for 1,000-gallon tank)
Hubs
Heavy duty 10 on 10” hubs
Heavy duty 10 on 10” hubs
Heavy duty 10 on 10” hubs
Heavy duty 8 on 8 hubs
Heavy duty 8 on 8 hubs
Pump
Single or dual piston pump or hydraulic driven pump with control systems available
Single or dual piston pump or hydraulic driven pump with control systems available
Single or dual piston pump or hydraulic driven pump with control systems available
Single or dual piston pump or hydraulic driven pump with control systems available
Single or dual piston pump or hydraulic driven pump with control systems available
Pole Jack
Heavy duty pole jack
Heavy duty 4” x 4” pole jack swivels out of the way
Heavy duty 4” x 4” pole jack
Heavy duty 4” x 4” pole jack
Heavy duty 4" x 4" pole jack swivels out of the way
Clevis Hitch
Adjustable CATIV/V tractor clevis
Adjustable CAT III/IV tractor clevis
Adjustable CAT III/IV tractor clevis
Patented adjustable tractor clevis
AG 37 Coulter
Coulter Assembly
AG37 Generation III coulters with 20” blades
Stainless steelmanifolds & hose
Check valves on each row
Stainless steelmanifolds & hose
Check valves on each row
Heavy Duty Coulter assemblies
Lights
7-pin flashing / warning light kit
7-pin flashing / warning light kit
7-pin flashing / warning light kit
Pull-Type Add-Ons
GEN III Coulter
Exclusive maintenance-free design.
The Gen 3 coulter has a treated outer coating for added hardness and durability, with installed rulon sleeves on the shafts. This eliminates grease fittings, and lubricates the rocker and swivel shafts, adding to the maintenance-free design of the 7-lip seal and recessed dust cap with O-ring seal. To ensure enhanced performance, these coulters are manufactured to keep grease in and moisture out, eliminating the hassle of daily maintenance and extending application performance.
Contact UsPrecision Technology
To deliver the highest quality in precision application, we offer Raven application control products to maximize your equipment investment and operational efficiency.
Learn More
